What is a track-out plate?
A track-out plate — sometimes called a rumble plate — is a welded steel plate placed at a construction site entrance to knock mud, dirt, and debris off truck and equipment tires before they reach the public road. Unlike a flat steel plate, it has raised welded ribs across the surface that actively shake material loose as vehicles roll over it, rather than just providing a hard driving surface.
What it’s used for
- Construction site entrances and exits
- Meeting SWPPP (Stormwater Pollution Prevention Plan) track-out control requirements
- Staging areas where trucks transition from unpaved ground to paved roads
- Keeping public roads clear of mud and debris ahead of inspections
- General contractor and civil site access control points
Size and specification
We carry one fixed specification, ready to deploy without a spec sheet or custom order:
| Spec | Detail |
|---|---|
| Size | 8′ × 10′ |
| Thickness | 1″ |
| Weight | 3,500 lbs |
| Surface | Welded angle-steel ribs |
| Use |
This is a finished welded unit, not a plain cut sheet — the ribs are structural, not decorative, and are what makes the plate function as a track-out control device rather than just a driving surface.
Handling and placement
At 3,500 lbs, this plate requires mechanical handling — forklift or equipment capable of lifting and positioning a plate this size and weight. Site crews should plan for equipment access at the point of placement rather than manual handling.
Purchase availability
This plate is currently sold, not rented. Pricing is flat and shown on the product page — there’s no quote step or cut list to fill out, since it’s a single fixed specification.
Ordering and lead time
Order directly online, or call to order if you prefer to speak with someone first. Because it’s a single spec, there’s no customization step slowing down the order — enter your quantity and check out.
Southern California delivery
We deliver across Los Angeles, Orange, Ventura, Riverside, San Bernardino, and San Diego counties. Confirm delivery timing and site access requirements (forklift on-site vs. delivery truck with lift gate) when you place your order, given the plate’s weight.
Frequently Asked Questions
No — a trench plate is a flat cover plate for covering excavations or utility trenches, while a track-out plate has welded ribs specifically designed to shake debris off tires. We currently carry track-out plates only.
We currently stock this one fixed 8′ × 10′ × 1″ specification. Contact us directly if your project needs a different size.
Track-out control is a common requirement at construction site entrances under stormwater pollution prevention plans. Check your project’s SWPPP or check with your civil engineer or compliance officer to confirm what’s required for your specific site.
At 3,500 lbs, delivery typically requires forklift or equipment access at the drop-off point — confirm this with us when ordering so delivery goes smoothly.